MTP USB Device Driver



Or Windows Mobile MTP USB Driver 12. How to Fix MTP USB Device Driver of USB Device - Duration, 2, 02. For example, transferring files from Android devices to Windows machines. SOLVED MTP device not detected or recognized windows 10 - Duration, 1, 25. GUIDE Fix MTP driver installation on Windo. Connecting your Android tablet to PC using.

  1. Mtp Usb Device Driver Android
  2. Mtp Usb Device Driver Windows 7
  • The Samsung MTP driver doesn't work with Windows 10 x64 build 2004 19041.329 MTP shows up under Other Devices in Device Manager and attempting to install the driver gives me 'A service installation section in this INF is invalid.' A Samsung Android phone shows in Device Manager but without MTP.
  • After few days with new camera I solved problem with no detection device in my PC (Windows 10, but I think that situation in lower version will be same) So what was the problem. After connection camera to any USB on my PC, camera was stucked as MTP USB device. Problem is, that new type of mother board have only USB 3.0 and higher (3.1, 3.2.

Download MTP driver for Windows 10, 8, or 7 to transfer media files from external storage devices to your PC or vice versa. The guide also describes how to update the MTP USB driver if it is outdated. Read on to know more.

Media Transfer Protocol (MTP) helps you transfer multimedia files from an external storage to Windows PC or vice versa. To ensure its smooth functioning, you require the correct MTP driver. Or else, you may face issues such as ‘MTP USB device or driver failed.’ It makes you unable to transfer files between your PC and an external storage device like your smartphone. Hence, it is necessary to download the MTP driver for Windows 10, 8, or 7 and install it.

However, you have to regularly update the MTP USB driver if you already have it. But not everyone knows how to get the latest version of the MTP device driver for Windows 10, 8.1, 8, or 7. Do not worry. Here we are again to help you get rid of another technical system driver issue. Let’s check out how to download, install, & update the driver for an MTP USB device on Windows 10 and other Windows versions (64/32 Bit).

MTP

Ways To Download & Update MTP USB Driver On Windows 10, 8, & 7

Here is how you can download the latest MTP USB device driver on your Windows 10, 8, or 7 PC and update it.

Download Latest MTP Driver Using Windows Device Manager

It is one of the most prominent manual way of downloading drivers on Windows PCs. The OS provides a default utility, Device Manager, to manage all the hardware and installed drivers. You can also use it to get the latest MTP USB device driver for Windows.

However, it is not that easy to download, install, and update the MTP USB driver using Windows Device Manager. You have to follow a lot of steps. And they are also pretty time-consuming. Here is how you can download the driver for your MTP device via Device Manager.

  • Launch the Run dialog box by using your keyboard. You simply have to press the Windows and R keys on your keyboard simultaneously.
  • Enter the ‘devmgmt.msc’ command in the text box. You can also copy it from here and then paste it into the Run dialog box.
  • Click OK.
  • After that, scroll to Other devices.
  • Expand the hardware category.
  • Right-click the MTP option listed in it.
  • Select Update driver to download the required version of the MTP USB device driver.
  • Now, choose among Search automatically for updated driver and Browse my computer for driver software options. Preferably it is better to go with the first one.

Once you choose the automatic way of searching for an updated MTP driver software, your OS starts finding the suitable driver version. Monitor the whole process. Approve the permissions asked by the system to download and install the driver for the MTP USB device on your PC.

Also Read: Guide to Install and Download USB-Serial Controller D Driver

Update MTP Driver Using Windows Update

Another way of updating the MTP USB device driver via a Windows default utility or feature is using the Windows Update. The method helps in upgrading the entire OS along with the necessary software and driver updates. Hence, if your MTP driver has become outdated, then you can try using Windows Update to get its latest version on your PC.

The feature dedicatedly focuses on upgrading the Windows. It is not that effective when it comes to updating PC drivers. But, if you still want to give it a try, then below are the instructions that you should follow.

  • Click the Start icon. You can find it on your taskbar.
  • Do a click on Settings.
  • Now choose Updates & Security in the Settings window.
  • After that, go to the Windows Update settings.
  • In the update settings, choose Check for updates.

Following the above steps initiates Windows search for the available updates. The OS asks you for permission to download and install the detected software or driver upgrades. You have to approve the request.

Use Bit Driver Updater To Download & Update MTP Driver For Windows 10

Let’s discuss the fastest & easiest way, in short, the best way to download the MTP driver for Windows 10, 8, & 7. Among all the above methods, some cons may bother you while downloading and installing a driver for your MTP device. You can avoid them by using the Bit Driver Updater for the task.

The software comes with almost no con. It offers a variety of helpful features that eventually helps users to update their PC drivers with ease. So, first of all, let’s have a glance at the benefits of using Bit Driver Updater to update the MTP USB driver.

  • The software ensures a safe driver upgrade by creating a restorable backup of the current drivers.
  • Users who are running short of time can use Bit Driver Updater to repair all their driver problems with a single click.
  • The interface is also beginner-friendly. You do not have to be a tech expert to update your drivers and tweak the system performance.
  • It comes with an option to plan your PC driver schedule.

If you have came this long, then it seems that you are interested in using Bit Driver Updater. For you, below, we have shared a brief guide to use the program.

  • Click the button provided below and download the feature-rich driver update program.
  • Go to the Downloads and run the software installer to install Bit Driver Updater.
  • Follow the mere instructions provided on the screen.
  • Launch to tool once it gets successfully installed.
  • Do a click on Scan Drivers.
  • Review the provided list of driver issues and click Update Now to fix them.

As discussed in the features, you can also fix all the driver issues simultaneously. Just go with the Update All option.

Best Solution To Download & Update MTP USB Driver On Windows

We hope you have fixed the ‘MTP USB device or driver failed’ issue by updating the MTP driver with the above solutions. It is essential to get rid of such problems to ensure a smooth transfer of media files among an external storage device like your smartphone and your PC. We like to conclude this guide by sharing our opinion on the best way to download and update the MTP USB device driver on Windows 10, 8, or 7. And we suggest using Bit Driver Updater as the best way to resolve any such PC driver issue.

Mtp usb device driver windows 10

Since Windows 10 arrived on the scene, Microsoft kept urging users to upgrade from earlier versions. People were hooked by the promise of a faster, better, more intuitive and modern UI. Naturally, theymade the jump immediately while others tagged along soon after. Overall, it is safe to say that Windows 10 has kept up its own end of the bargain.

However, those who thought that jumping aboard the Windows 10 train would be the end of bugs on their PCs were in for a rude awakening. Over the years, Windows 10 has had its share of annoyances, such as the bug that stopped MTP devices from working when connected to the computer. Many users started getting this issue after the anniversary update and the subsequent patches didn’t solve it for everyone.

On the contrary, some people complained that they are unable to move files to and from their phones after connecting to their computer via USB. If you’ve been grappling with this problem, this guide is for you.

What Is MTP mode?

MTP stands for Media Transfer Protocol. It is the file transfer mode used by modern Android phones for transferring files to and from a computer. MTP replaced the USB mass storage protocol which was used on older phones running Android. USB mass storage exposed every part of the phone to the computer while MTP is rather more selective.

Nowadays, when you connect your phone to a computer over USB, you can choose between MTP and PTP. PTP stands for Picture Transfer Protocol. When you choose this mode, your phone appears to your PC as a digital camera, and you can transfer photos back and forth. MTP is actually an extension of PTP with added tweaks to accommodate other forms of files and media.

When phones still used USB mass storage, you couldn’t access the files on the storage while they were connected to the computer. You had to disconnect the phone to regain access. With MTP, you can access a file on your computer and phone at the same time. Moreover, USB mass storage required phone filesystems to use the FAT format. With MTP, phones can use better filesystems like exFat and F2fs.

MTP not Working on Windows 10

Mtp Usb Device Driver Android

Most people don’t think about the process that goes on when a phone is connected to a computer. They just plug in a USB at the appropriate ends and start transferring files. To be fair, most of the time, there’s no need to think about it. The phone automatically installs the drivers that it needs to establish a connection with the PC.

However, sometimes, the phone doesn’t show up on the computer even after being plugged in. When you open File Explorer and This PC, the phone’s internal storage either doesn’t show up as a drive or doesn’t show up at all. Sometimes, your smartphone’s internal storage is shown, but clicking it yields an error message.

Plug-and-access is a basic functionality of Windows that shouldn’t be broken. Unfortunately, connection between an MTP-enabled device and a PC often runs into errors. The user can not transfer files or make the MTP device appear on the computer. This issue comes in various forms. You can get error messages like:

  • MTP USB Device driver failed
  • MTP USB device not installing
  • MTP not recognized
  • The USB device is not recognized by your computer
  • Code 28

Why Is MTP not Working?

By this point, everyone is used to simply plugging in their phone to the computer and moving whatever they want to and from both devices. So, when MTP fails to work, it is inevitable to wonder what happened. If you want to know the reasons why your Android phone stopped working on your PC, check out some possible reasons here:

  • Missing driver. A driver from the Android phone needs to be installed on your PC for the connection to work. If this driver hasn’t been installed or is missing, MTP errors will likely happen.
  • Corrupted driver. If the Android MTP driver becomes damaged or corrupted, your phone may be unable to establish a proper connection.
  • USB cable. Using the wrong cable can cause an error in the connection. It is better to use the cable that came with the phone’s charger or another cable of similar pedigree.
  • Outdated drivers. A system upgrade might have rendered the current driver obsolete. Updating the driver should help fix the problem of MTP device not working on Windows 10.
  • Phone is in charging mode. You need to manually select MTP or File Transfer from your phone’s notifications.

Now that you know the reasons, let’s look ahead to the potential solutions.

How to Fix the MTP not Working Error on Windows 10

When many users first reported this issue, Microsoft responded with an update that apparently fixed it for some people. If you’re still facing the problem after applying the update, other tips and tricks are available. Let’s introduce you to some top solutions to fix the MTP connection issue on Windows 10.

Check Your MTP Device

Before we attempt to apply solutions on your PC, it is worth checking whether the issue lies with the hardware. If the problem is on the hardware side, no amount of system troubleshooting can help you get rid of the problem.

First of all, make sure that you have selected the MTP protocol on your phone. In most modern phones, you have a choice of connection type whenever the device is plugged into a PC port. Swipe down on your phone to reveal the connection notification and select MTP or File Transfer from the options. Most phones select a charging-only mode by default and you have to manually choose a file transfer mode.

If you’re getting “USB device not recognized” notifications, the issue might lie with the PC ports. If you have another device lying around, try connecting it, using the same ports. If it works, the issue might lie with your phone’s drivers or the USB itself.

Ensure that the USB you’re using can handle file transfers. After a long period of use, some USBs lose their file transfer capabilities and can only charge the device. Also, if you’re not using the phone’s original cable, make sure the one you have isn’t a charging-only cable.

Don’t forget to try out all the available ports on your PC. You should make thorough checks to ensure that the issue doesn’t lie with your device, the cable, or the computer’s ports. Only then should you proceed to the other solutions in this guide.

Install the MTP Drivers

When you plug in a smartphone or MTP camera to your computer for the first time, the drivers for the device are automatically installed. These drivers enable a connection to be established between the two devices over USB.

If the drivers aren’t installed or have been removed from your PC, no file transfer connection is possible. The only way that could happen is if there’s another driver on your computer your smartphone can use.

If you notice that your device is showing up in the Device Manager with a yellow triangle or exclamation mark, you can try reinstalling it.

Here’s how:

  1. Hold down the Windows key and press X.
  2. Select Device Manager.
  3. Locate and select Portable Devices or Other Devices — depending on where your device is placed.
  4. Right-click your device and select Update Driver.
  5. Choose “Browse my computer for driver software”.
  6. On the “Browse for driver software on your computer” window, select “Let me pick from a list of device drivers on my computer.”
  7. On the “Select the device driver you want to install for this hardware” screen, select MTP USB Device and click Next.
  8. Follow the on-screen wizard to complete the setup.

The exclamation mark should have gone away and you can transfer files to and from your MTP device now.

Sometimes, you need to manually install device drivers for your MTP device because they can’t be installed automatically. For some device brands, Windows prevents installation of their drivers. You have to disable driver signature enforcement in Windows 10 before you can install unsigned third-party drivers.

To do this, open an elevated Command Prompt window and run the command below:

bcdedit.exe /set nointegritychecks on

Reboot your PC after running this command. When you’ve finished installing the device driver, run the following command to turn driver signature enforcement back on and reboot your computer:

bcdedit.exe /set nointegritychecks off

That should solve the MTP device not working bug for you.

Update the MTP drivers

If the device driver is already installed but you can’t transfer files to the device, you might need to update the driver. The driver might be broken or encounter another problem that is causing the MTP device to not work on Windows 10. Or, it could simply be obsolete.

In all these instances, updating the driver is your best bet to eliminate this issue once and for all. You can use device manager to update your MTP device or rely on a dedicated driver updater tool.

  • Update the MTP Device Driver with the Device Manager

Using Device Manager to bring your MTP device driver up to date is a straightforward task. You don’t have to take our word for it — you can try the steps yourself:

  1. Hold down the Windows key and press R.
  2. Type “devmgr.msc” (no quotes) in the Run box and press Enter.
  3. Expand Portable Devices or Other Devices in the Device Manager, depending on where your phone is shown.
  4. Right-click the device and select Update Driver.
  5. On the next screen, select the “Search automatically for updated driver software” option.

Windows will search for and install the updated version of the driver.

  • Install the MTP Device Driver with anAutomatic Driver Updater

Resolve PC Issues with Driver Updater

Unstable PC performance is often caused by outdated or corrupt drivers. Auslogics Driver Updater diagnoses driver issues and lets you update old drivers all at once or one at a time to get your PC running smoother

Auslogics Driver Updater is a product of Auslogics, certified Microsoft® Silver Application Developer
DOWNLOAD NOW
If you’re time conscious or don’t have the energy to spare on updating your drivers manually, you can do it automatically with driver updating software like Auslogics Driver Updater.

Driver Updater will scan your system for obsolete, missing, and corrupt drivers and find the latest, official version for you. All you have to do is click a button to commence the installation. The tool will even save your current driver for you in case you want to use it later.

  1. Download the Auslogics Driver Updater setup file to your desktop.
  2. Install the software and run a scan to reveal obsolete and problematic drivers.
  3. Identify your MTP device driver and click the Update button to automatically download and install the latest and correct drivers. With a license, you can click a single button to automatically update all the obsolete drivers in one go.

After the operation is complete, restart your computer. Go on and enjoy error-free file transfer between your PC and MTP device.

Use Command Prompt to Turn on MTP

You can use Command Prompt to quickly enable the MTP feature on Windows. This is a faster method than opening many settings screens to get at what you want to do.

  1. Press the Windows key and type “cmd” (no quotes).
  2. You need to run Command Prompt as an administrator. You can press Ctrl+Shift+Enter. Another way is to simply click Run as Administrator.
  3. In the elevated cmd window, type the following string and hit the Enter key:

net localgroup Administrators local service /add

That’s all. Now try connecting your mobile MTP device to your PC and check whether you can transfer files.

Install wpdmtp.inf

Some users stated that the MTP device not working issue was accompanied by an “A service installation section in this INF is invalid“ notification. If you get this message as well, it indicates that something is wrong with a particular INF file.

Device

Luckily, this file in question is already present on your PC: you don’t need to download any app to extract it or go online to look for it. This file is named wpdmtp.inf and it is related to MTP and you can manually install it to solve the error.

There are two ways to install the wpdmtp.inf file: from the Windows directory and through Device Manager. Let’s examine each method in turn.

  • Install wpdmtp.inf from the Windows directory

Simply find the file in the Windows folder and install it. Easy peasy.

  1. Click the File Explorer icon on your taskbar to open the app.
  2. Click This PC and select your main C drive, the one in which Windows is installed.
  3. Navigate to C:WindowsINF.
  4. Locate and right-click wpdmtp.inf and select Install.
  5. Click Yes when the “Do you want to allow this app to make changes to your device?” UAC prompt shows up.

That’s it. You can connect your MTP device now to check whether the steps fixed the error.

  • Install wpdmtp.inf through the Device Manager

Are you getting the ” This USB device is not recognized” error after plugging in your MTP device? If so, it is likely that your device will be displayed with a yellow exclamation mark in the Device Manager. If this is the case, you can use the process of updating a device driver to install wpdmtp.inf through the Device Manager.

  1. Hold down the Windows key and press X.
  2. Select Device Manager.
  3. Click Portable Devices to locate your MTP device. If you don’t find it there, it should be under Other Devices.
  4. Right-click the problematic device and select Update Driver.
  5. On the next screen, select the “Browse my system for driver software” option.
  6. Click Browse and select the wpdmtp.inf file. Remember, it’s located at C:WindowsINF.
  7. Follow the instructions to install the file.

This done, you should be able to plug in your MTP device without further issues.

Enable USB Debugging

You may need to enable USB debugging on some smartphones to successfully connect them via USB to your Windows 10 computer. Turning on USB debugging can also help if you’ve already selected File Transfer but it isn’t working.

The method to enable this useful feature on mobile devices can vary from one brand to the other. Generally, however, the procedure is similar.

Typically, here’s what you need to do.

  1. Proceed to your phone’s Settings app.
  2. Scroll down to and select About Phone. This option may be located within another Settings option such as System.
  3. Locate “Build number” and rapidly click on it seven times. The seventh click unlocks the hidden Developer Options menu.
  4. Find Developer Options in Settings and select it.
  5. Locate USB Debugging and enable the option.

If USB debugging doesn’t help you to resolve the connection issues, try the fix below.

Turn on Airplane Mode

Weird as it sounds, airplane mode can help you establish a connection between your Windows 10 PC and an MTP device such as your phone or camera. Some users explained how they turned on airplane mode and successfully connected the devices.

You can try it as well. Remember that you need to turn on that special mode on both your computer and phone.

If the connection is successful and you’re able to transfer files, you can keep using this workaround until you figure out a permanent fix. Don’t forget to turn airplane mode back off when you’re done so you can use network, WiFi, and Bluetooth on your devices.

Repair the Registry

Do you know that when you install drivers for a portable device, some keys are created in the Windows Registry? Suppose these keys get damaged or become corrupt, it can cause connection issues with the MTP device.

One sure way to eliminate this problem is to remove the broken registry key from the system. After doing that, plug in the device enables a new, unbroken key to be written to the registry. If this happens, the device will start working immediately.

A word of caution: Editing the registry should be a careful process. It contains a lot of important stuff that shouldn’t be touched. Modifying the wrong thing can lead to unintended consequences. To protect yourself, it is recommended to create a restore point just before editing the registry so you can roll back your system if something happens. You can also generate a backup of the current registry before making any significant manual modification.

Here’s how to create a registry backup:

Mtp Usb Device Driver Windows 7

  1. Press the Windows key and type “regedit” (no quotes).
  2. Press Enter or click Open to launch Registry Editor.
  3. In Registry Editor, click the File tab.
  4. Select Export.
  5. Name the file and save it to a convenient location.

Once that’s done, you’re ready to edit the registry to make your phone establish a connection with your PC over USB.

  1. Open the Run tool in Windows 10. Hold down the Windows key and press R. Alternatively, press the Windows key and type “Run” (no quotes).
  2. In the Run dialog, type “regedit” (no quotes) into the text field and click OK or hit the Enter key. This will launch the Registry Editor.
  1. When the Registry Editor window is open, navigate to the path below in the left pane. You can also quickly jump to the terminal location by pasting the path in the paths field.

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass

  1. Select Edit at the top-left corner of Registry Editor and select Find.
  2. In the Find box, type “portable devices” (no quotes) and click Find Next.
  3. You’ll land on the key you need to remove. In the right pane, right-click UpperFilters (if it is present) and select Delete.

Now you can exit the Registry Editor. Reconnect your phone via USB and check whether the MTP not connecting issue still appears.

Try the Media Feature Pack

If you’re unable to connect your MTP device to a computer running the N or KN version of Windows 10, it might be related to the absence of the Media Feature Pack. The MFP is not present on these special versions of Windows 10 by default. Meaning that you need to install it manually if you need it.

Unfortunately, if the Media Feature Pack isn’t present on a PC, it can lead to issues with connecting MTP devices. The MFP is related, in a roundabout way, to the Media Transfer Protocol and also to Windows Media Player.

To download the Media Feature Pack, proceed to the Microsoft website and download the file to your PC. Install it as you would a normal executable and restart your computer.

Now, test whether you can connect your MTP device. If it’s still not working, you can try the last solution.

Install the MTP Porting Kit from Microsoft

If you can get ahold of the MTP Porting Key developed by Microsoft, it can help you to resolve your MTP device issues. Simply grab the kit from Microsoft or another trusted site and install it.

When you’re done with installation, reboot your machine and connect your MTP device.

This should resolve everything and you can go back to transferring your photos, videos, and documents.

Wrapping up….

This guide has explained how to enable MTP in Windows 10 for users who are struggling with connecting their smartphones and cameras. Another tip is to use an OTG flash drive to move things between your device and computer without the need to physically connect them with a USB cable.